+ 25
Tyler's Traverse Big Loop
Mountain Biking Trail
Hard
36.08 mi
3,366 ft
A lengthy 100% singletrack loop accessing the far-flung Tyler's Traverse trail.
Tyler’s Traverse to Catch and Release forms the southern edge of the primary Bend trail system, so it’s quite removed from the heart of Phil’s. You have to do some work to reach Tyler’s, but the effort required to pedal all the way there is richly rewarded!
The route to reach Tyler’s follows a series of classic trails in the Phil’s Trail Network. It begins by climbing the uphill-only Ben’s Trail and then working its way south on Voodoo to Ticket To Ride. After climbing C.O.D. for a few miles, the route crosses the Cascade Lakes Highway and ascends the Funner trail.
While Funner might be the most technical trail in Bend in the downhill direction, there are many splits in the trail with dedicated climbing routes that are much less technical than the downhill rock gardens and drops. While the climb up Funner still poses a few challenges, it’s overall a well-built uphill that gets you to the goods.
After pedaling across Upper Tiddlywinks and Kiwa Butte to get to the top of Tyler’s Traverse, get ready for miles and miles of fast, flowy descending!
Unlike nearby Tiddlywinks, you won’t find any big features on Tyler’s. If you keep your eyes open, you can spot a few small jumps, alt drop lines, and the occasional little challenge sprinkled throughout the endless series of low, flowy berms. While there aren’t any great views to be had (aside from one corner), the constant swoop and flow as the singletrack descends for miles through the pines is in and of itself sufficient reward for all of your work!
After Tyler’s, Catch and Release consists of classic pedally, green Bend singletrack to get back to the Cascade Lakes Highway. This section of trail is up and down with no serious descending, but provides a welcome break after the high-speed shredding down Tyler's.
After crossing the highway, you’ll descend the lower sections of C.O.D., which are some of the rockiest trails in the Phil’s Trail Network. While some of the most technical sections do have easier lines, be prepared to challenge yourself on Central Oregon's volcanic rock.
After you blast through the chunk on C.O.D., it’s all green, easy pedaling to return to the Phil’s Trailhead.
Congratulations: you’ve just pedaled 36 miles of classic Bend, Oregon singletrack! Written by Greg Heil
Tyler’s Traverse to Catch and Release forms the southern edge of the primary Bend trail system, so it’s quite removed from the heart of Phil’s. You have to do some work to reach Tyler’s, but the effort required to pedal all the way there is richly rewarded!
The route to reach Tyler’s follows a series of classic trails in the Phil’s Trail Network. It begins by climbing the uphill-only Ben’s Trail and then working its way south on Voodoo to Ticket To Ride. After climbing C.O.D. for a few miles, the route crosses the Cascade Lakes Highway and ascends the Funner trail.
While Funner might be the most technical trail in Bend in the downhill direction, there are many splits in the trail with dedicated climbing routes that are much less technical than the downhill rock gardens and drops. While the climb up Funner still poses a few challenges, it’s overall a well-built uphill that gets you to the goods.
After pedaling across Upper Tiddlywinks and Kiwa Butte to get to the top of Tyler’s Traverse, get ready for miles and miles of fast, flowy descending!
Unlike nearby Tiddlywinks, you won’t find any big features on Tyler’s. If you keep your eyes open, you can spot a few small jumps, alt drop lines, and the occasional little challenge sprinkled throughout the endless series of low, flowy berms. While there aren’t any great views to be had (aside from one corner), the constant swoop and flow as the singletrack descends for miles through the pines is in and of itself sufficient reward for all of your work!
After Tyler’s, Catch and Release consists of classic pedally, green Bend singletrack to get back to the Cascade Lakes Highway. This section of trail is up and down with no serious descending, but provides a welcome break after the high-speed shredding down Tyler's.
After crossing the highway, you’ll descend the lower sections of C.O.D., which are some of the rockiest trails in the Phil’s Trail Network. While some of the most technical sections do have easier lines, be prepared to challenge yourself on Central Oregon's volcanic rock.
After you blast through the chunk on C.O.D., it’s all green, easy pedaling to return to the Phil’s Trailhead.
Congratulations: you’ve just pedaled 36 miles of classic Bend, Oregon singletrack! Written by Greg Heil
Created By
Strava Routes
